There is no way to install SmartPedal backwards. If any install step is skipped, the Check Engine light may come on but the vehicle is safe—it will not accelerate until the pedal is properly connected
Please read through the entire installation section (it's a fast read!) before starting the installation.
- Vehicle should be on a level surface with gearshift in park and parking brake fully engaged.
- Start vehicle and confirm that the dashboard “check engine” warning light is off.
If warning light is on before installation begins, please diagnose and clear the warning before proceeding.
- Turn off vehicle and remove key from ignition. If vehicle uses a key fob, move the fob at least 30 feet from car. Wait 3 minutes for the vehicle's electronic systems to power down before installing SmartPedal.
Comments
0 comments
Article is closed for comments.